electric quick coupler for the Huina Kabolite K966 (scale 1:14)
Not available? Then follow this pre-order guide.
Out of stock
Quick coupler for the Huina Kabolite K966 in 1:14 scale.
This Quick coupler is made of PETG and has milled aluminium plates as holders.
This quick coupler was printed from PETG. The material is UV stable, temperature resistant up to 80°C and waterproof.
The quick coupler is servo-controlled and can be locked and unlocked fully electrically.
Any equipment and buckets can be coupled. The coupling of the original bucket is possible without adapter.
This can be quickly disassembled and cleaned.
Pre-orders are possible, please use our contact form or at service@exapur.com.
The changer is pre-assembled and only needs to be attached to the model!
- Dimensions: (HxLxW) 50 mm x 83 mm x 33 mm
- Bolt diameter: approx. 4 mm
- servo cable length:
- Version: 2
Content:
- 3D printed parts
- 4x screws
- 2x bolts
- 1x wire
- 9x aluminium plates
- 1x Servo
- 2x bell cranks
Videos:
| Weight | 0,21111 kg |
|---|---|
| Material | PETG, Metal screws, Metal bolts, Aluminium |
| Warnings | -Not suitable for children under 36 months. Risk of suffocation due to small parts that can be swallowed. |
Be the first to review “electric quick coupler for the Huina Kabolite K966 (scale 1:14)”
Related products
Accessories Huina Kabolite K966 (1:14)
Shovel with straight cutting edge for the Huina Kabolite K966 (scale 1:14)
Reviews
There are no reviews yet.