Ripper (fang) for the Volvo EC160 E (scale 1:14)

Ripper (fang) for the Volvo EC 160 E Hydraulic / Electric in 1:14 scale.

The fang is particularly good for lifting stones and roots out of the ground.

This Ripper (fang) is made of PETG and has milled aluminium plates as holders. Due to the 2 steel bolts with safety device, the ripper can be changed quickly.
This bucket was printed from PETG. The material is UV stable, temperature resistant up to 80°C and waterproof.

Tooth is replaceable!

Pre-orders are possible, please use our contact form or at service@exapur.com.

• Dimensions: (HxLxW) 84 mm x 65 mm x 36mm
• Bolt diameter: approx. 6mm
• Holder distance (plate distance): 26mm
• Bore distance: 30,3 mm

Content:

• 1x fang
• 4x screws
• 2x bolts
• 2x splints
• 2x aluminium plates
• 2x 3D printed parts